WhaleConnect Usage Guide
- This document explains how to use WhaleConnect. For a full list of features, see the project's GitHub repository.
Articles
arduino 19 software 7 rtc 5 sensors 5 shields 5 7-segment-shield 3 outputs 3 projects 3 raspberry-pi 3 atmega-40-board 2 bluetooth 2 ethernet 2
DS130X Library Common Reference
- Code samples and documentation for the DS130X library common to the DS1302 and DS1307 RTCs
SSD1306 OLED Display with Arduino
- Displaying graphics and text on the SSD1306 display with Arduino
ATmega 40 Board Data Logging
- Logging data and saving timestamps onto an SD card with the ATmega 40 Board
ATmega 40 Board
- A development board for Atmel AVR microcontrollers, containing an on-board 74HC595 shift register and DS1307 RTC and using the Arduino standard pinout
Ethernet I/O Controller with Arduino
- Creating a web page with the Arduino and Ethernet shield to control I/O pins
Ethernet Shield
- Using the Ethernet shield with an Arduino as a web server
Arduino I2C Scanner
- Scanning and listing all connected I2C devices from the Arduino
Seven-Segment Shield
- Using the Seven-Segment Shield's display, EEPROM, temperature sensor, and RGB LED with Arduino
LCD Keypad Shield
- Using the LCD Keypad Shield's display, backlight, and buttons with Arduino
L293D Motor Driver with Arduino
- Controlling a motor from an Arduino using the L293D H-bridge
HC-05 Module with Arduino
- Using the HC-05 Bluetooth module to wirelessly control an Arduino from a computer
MPU6050 with Raspberry Pi
- Measuring acceleration and rotation with a Raspberry Pi and MPU6050 IMU
Ultrasonic Sensor with Raspberry Pi
- Measuring distances with a Raspberry Pi and HC-SR04 ultrasonic sensor
ADS1115 with Raspberry Pi
- Measuring analog values with a Raspberry Pi and ADS1115 ADC
LDR with Arduino
- Using a light-dependent resistor (LDR) with Arduino to measure brightness
Countdown Timer
- Creating a timer with an Arduino, buzzer, keypad, and seven-segment shield
74HC595 Shift Register with Arduino
- Controlling LEDs from the 74HC595 shift register
Stopwatch
- Creating a stopwatch with an Arduino and a seven-segment shield